On November 1, 2026, China's non-ferrous metals industry standard YS/T 1845-2026, Lithium Adsorbents, officially came into effect. Developed within the industry standardization framework promoted by the China Nonferrous Metals Industry Association (CNIA), the standard is administered by the Rare Metals Subcommittee of the National Technical Committee for Standardization of Nonferrous Metals and was issued by the Ministry of Industry and Information Technology (MIIT).
As China's first non-ferrous metals industry standard specifically developed for lithium adsorbent products, YS/T 1845-2026 covers aluminum-based and titanium-based lithium adsorbents, establishing unified requirements for product classification, technical specifications, testing methods, and inspection procedures.
JIUWU Hi-Tech, as the lead drafting organization of the standard, has translated its extensive technological expertise and industrial application experience into a standardized technical framework for the industry. This milestone demonstrates the company's technical capabilities and leadership in lithium adsorbent development and industrialization.
Image: Official announcement of the industry standard.
In adsorption-based lithium extraction processes, lithium adsorbents are critical materials that directly influence lithium recovery efficiency and operating costs. However, the chemical composition of salt lake brines varies significantly across different resources.
How should operators select the most suitable lithium adsorbent for their brine conditions? Beyond adsorption capacity, which performance indicators deserve particular attention?
Drawing on years of materials research, product development, and industrial project experience, JIUWU Hi-Tech shares practical insights into lithium adsorbent selection, performance evaluation, and industrial applications.
Salt lake brines differ considerably in lithium concentration, magnesium-to-lithium ratio, and the concentrations of various impurities. These factors directly affect adsorbent performance under actual operating conditions.
When evaluating lithium adsorbents, four key performance indicators should be considered.
Adsorption Capacity: Determining the Fundamental Lithium Uptake Capability
Adsorption capacity refers to the total amount of lithium ions that can be captured per unit mass or volume of adsorbent under specified conditions.
For continuous industrial operations, dynamic working adsorption capacity is particularly important, as it provides a more representative assessment of adsorbent performance under actual process conditions.
Ion Selectivity: Influencing Lithium Recovery Efficiency and Product Purity
In addition to lithium ions, salt lake brines contain various competing ions and impurities, including sodium, potassium, magnesium, boron, and silicon-containing species.
High-performance lithium adsorbents must maintain strong selectivity toward lithium ions in complex brine environments while minimizing the co-adsorption of unwanted species.
Higher selectivity can reduce the treatment burden on downstream separation and purification processes, ultimately improving process efficiency and reducing operating costs.
Particle Strength and Dissolution Loss: Ensuring Long-Term Operational Stability
In industrial applications, lithium adsorbents repeatedly undergo adsorption, desorption, and material transportation processes.
Insufficient mechanical strength, excessive particle breakage, or high dissolution loss can increase adsorbent replacement costs and negatively affect equipment operation and downstream process stability.
Therefore, particle compressive strength, dissolution loss rate, and structural integrity throughout repeated operating cycles are essential performance indicators.
Cycling Performance and Regeneration Consumption: Determining Lifecycle Economics
Lithium adsorbents are designed to function through repeated adsorption–desorption cycles.
In addition to adsorption capacity retention after multiple cycles, acid consumption, water consumption, and other regeneration requirements must be carefully evaluated.
Together, these factors determine the adsorbent's long-term operating costs and overall lifecycle economics.
Aluminum-based and titanium-based materials are two major categories of lithium adsorbents and are both covered by the newly implemented YS/T 1845-2026 standard.
These materials have different performance characteristics and are suited to different brine conditions.
Based on JIUWU Hi-Tech's existing product portfolio:
Aluminum-Based Lithium Adsorbents
JIUWU's aluminum-based lithium adsorbents are primarily suitable for neutral and mildly acidic brines. They offer high adsorption capacity and rapid mass transfer, making them suitable for lithium recovery processes where adsorption efficiency is a key consideration.
Titanium-Based Lithium Adsorbents
JIUWU's titanium-based lithium adsorbents are primarily designed for alkaline brines. They offer advantages in maintaining the stability of lithium-rich eluate and controlling acid consumption during regeneration.
In practice, lithium adsorbent selection should not be based on any single performance indicator.
Instead, the decision should consider brine chemistry, dynamic adsorption performance, long-term material stability, regeneration requirements, and overall process economics.
Laboratory-scale testing using actual brine samples is essential to verify the suitability of the selected adsorbent before industrial implementation.
JIUWU Hi-Tech has long been committed to the research, development, and industrialization of lithium adsorbent materials.
The company has established a diversified product portfolio covering aluminum-based, titanium-based, and manganese-based lithium adsorbents.
Among these products, aluminum-based and titanium-based lithium adsorbents have achieved large-scale commercial production, while the development of manganese-based lithium adsorbents has been completed.
JIUWU has also introduced DS-1, a sulfate-resistant aluminum-based lithium adsorbent, to address specific brine compositions and continuously improve product adaptability and performance.
Image: Key advantages of JIUWU lithium adsorbents.
Industrial Manufacturing and Supply Capacity
Through its wholly owned subsidiary, Tibet JIUWU New Materials Technology Co., Ltd., the company has established a lithium adsorbent production facility with an annual production capacity of 6,000 metric tons.
This production capability supports consistent product quality, reliable supply, and the commercial deployment of lithium adsorption technologies.
By integrating materials R&D, performance optimization, and large-scale manufacturing, JIUWU has developed a comprehensive industrialization platform that supports continuous product innovation and dependable supply across multiple lithium adsorbent categories.
Image: Tibet JIUWU lithium adsorbent manufacturing facility.
Long-Term Material Stability and Durability
For aluminum-based lithium adsorbents, JIUWU has achieved the following performance results:
Annual dissolution loss rate below 3%.
Nearly four years of stable operation in industrial-scale installations.
More than 5,000 accumulated adsorption–desorption cycles.
Estimated service life exceeding 10 years under normal operating conditions, based on existing operational data.
For titanium-based lithium adsorbents, the company has achieved:
Annual dissolution loss rate below 15%.
Six months of continuous operation in a laboratory-scale continuous ion-exchange testing system.
More than 800 accumulated testing cycles.
Estimated service life exceeding two years under normal operating conditions, based on available testing data.
In addition, JIUWU lithium adsorbents demonstrate particle compressive strength exceeding 40 N per particle, supporting structural stability during repeated adsorption, desorption, and material transportation.
Note: Aluminum-based and titanium-based adsorbents have been evaluated under different operating conditions and at different validation stages. Their performance data should therefore not be directly compared. Estimated service lives are based on currently available operational and testing data rather than guaranteed operating periods.
The ultimate performance of lithium adsorbent materials must be validated through real-world applications.
Salt lake resources differ considerably in chemical composition and operating conditions. Raw brines and concentrated bitterns, in particular, present different challenges for adsorbent selection and process design.
JIUWU Hi-Tech's lithium adsorbents have been applied in multiple salt lake lithium extraction projects, providing valuable engineering experience across different brine conditions.
Image: Qinghai Salt Lake Industry's 40,000-ton-per-year basic lithium salt project site.
From concentrated bittern to raw brine applications, JIUWU's project experience provides a practical foundation for continuously improving adsorbent performance, expanding brine compatibility, and optimizing integrated lithium extraction processes.
Integrated Adsorption and Membrane Separation Technologies
In addition to lithium adsorbent materials, JIUWU Hi-Tech has extensive expertise in ceramic membranes, organic membranes, and integrated membrane separation systems.
The company has developed multiple technical routes for lithium extraction, including:
All-membrane lithium extraction processes.
Adsorption-based lithium extraction processes.
Integrated membrane–adsorption lithium extraction processes.
Depending on brine composition and product quality requirements, JIUWU can integrate pretreatment, adsorption, membrane separation, concentration, and purification technologies into customized process solutions.
These capabilities enable the company to provide process engineering, equipment integration, and technical solutions tailored to different lithium-bearing resources.
Image: Minmetals Salt Lake's 10,000-ton-per-year lithium carbonate project, China's first industrial-scale all-membrane lithium extraction project of this capacity.
By combining lithium adsorption materials with membrane separation technologies, JIUWU has expanded its capabilities beyond the research and manufacturing of individual materials to include integrated lithium extraction process development and engineering implementation.
This integrated approach enables the company to offer flexible technical solutions for efficient lithium recovery from salt lakes with diverse resource characteristics.
The establishment of industry standards represents an important step toward improving product quality, strengthening technical consistency, and supporting the sustainable development of emerging technologies.
The official implementation of YS/T 1845-2026, Lithium Adsorbents, led by JIUWU Hi-Tech, establishes unified requirements for the classification, technical specifications, testing methods, and inspection procedures of aluminum-based and titanium-based lithium adsorbents.
The standard provides an important technical reference for manufacturers in product development and quality control, testing organizations in performance evaluation, and downstream customers in product selection, procurement, and quality acceptance.
For the salt lake lithium extraction industry, which is progressing toward increasingly large-scale commercial applications, this standard delivers several important benefits.
First, it establishes more consistent evaluation criteria, improving the comparability of technical specifications among different lithium adsorbent products and reducing information asymmetry in the market.
Second, it encourages industry competition to focus on fundamental performance factors, including adsorption efficiency, product quality, operational stability, and lifecycle economics.
These developments can support closer collaboration across the lithium extraction value chain and promote the continued advancement of adsorption-based lithium recovery technologies.
From lithium adsorbent research and development to large-scale manufacturing and industry standardization, JIUWU Hi-Tech has consistently contributed to the innovation and commercialization of lithium adsorption and separation technologies.
The implementation of YS/T 1845-2026 represents another important milestone in transforming the company's technical expertise and engineering experience into industry-wide technical practices.
Looking ahead, JIUWU Hi-Tech will continue advancing the development of aluminum-based, titanium-based, and other lithium adsorbent materials while strengthening the integration of adsorption and membrane separation technologies.
Through continuous technological innovation and industrial application, the company remains committed to improving the efficiency of salt lake lithium resource development, supporting more sustainable lithium recovery, and contributing to the long-term growth of the lithium industry.




Call us on:
Email Us:
No. 9 Park Road, Pukou District, Nanjing City (Sanqiao Factory)