How To Start Your Equipment With Ceramic Membrane Elements?
After mounting the equipment: Fill the equipment with desalted water. Do not use normal water, chalk inside normal water can reduce the flow rate. Start your equipment and start a normal filtration run. After approx. 10 min. go to max. transmembrane pressure. If necessary start a normal cleaning run with membrane cleaners. Then rinse the equipment and refill with the fluid you wish to filter. Start filtration.
JIUWU Membrane Products
- December 27, 2018Yes, it is. Ceramic membrane is a kind of Cross-flow filtration which is a continuous process in which the feed stream moves parallel to the membrane filtration surface and purified liquid passes thro...view
- December 27, 2018Ceramic membrane needs to be used and operated in normal operating procedures. The following conditions and chemicals of operation are absolutely not allowed, because it may destroy or damage ceramic ...view
- December 27, 2018On receipt, inspect the product and packaging for signs of damage. Check if the grade and part number of the item supplied meets the requirements for the applicationThe product should be stored in its...view
- December 27, 2018Ceramic membrane manufactured by JIUWU HI-TECH is used for liquids separation in a cross-flow filtration way which is different from dead-end filtration.Dead-end filtration means the fluids flow is ve...view
- December 27, 2018High performance sealing assemblies;Industrial or sanitary design ;Module material is stainless steel, FRPP, Titanium or customized on demand;Customized ceramic membrane module can also be considered ...view
- December 27, 2018Yes, ceramic membranes can be heat sterilized. But steam sterilization is a delicate procedure, which carries significant risks of damaging the system components often induced by the difficulty to con...view